Main features of the UMG 96RM-CBM

MULTIFUNCTIONAL NETWORK ANALYZER

The UMG 96RM multifunction measuring device is primarily designed for use in low-voltage and medium-voltage distribution systems. The device measures harmonics up to the 40th harmonic and has rotating field components. The device has up to four digital inputs and six digital outputs. The measurement data memory is 256 MB.

MEMORY

Many UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.

TARIFFS

The UMG measuring devices offer an extensive selection of tariffs for the safe and precise recording of working values for individual consumers; up to 14 depending on the device type. Of course, a distinction is made between active energy (reference, supply and without backstop) and reactive energy (inductive, capacitive and without backstop). This means that high and low tariffs can be recorded separately, for example.

HARMONICS

Harmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.

PULSE INPUT/OUTPUT

Pulse inputs can be used to record the values of water and gas meters with UMG measuring devices, for example. The working pulses can be transmitted to a control system, e.g. BMS, PLC, SCADA systems, via pulse outputs as measured value transmitters.

MEASUREMENT ACCURACY

The high measuring accuracy is based on the high sampling rate and very good long-term stability. When used as intended (ambient temperature!), the measuring accuracy is still greater than that of conventional meters as delivered, even after years. Class A certified devices are available for particularly demanding measuring tasks.

Areas of application

  • Measurement, monitoring and control of electrical parameters in power distribution systems
  • Recording of load profiles for energy management systems (e.g. ISO 50001)
  • Recording energy consumption for cost center analysis
  • Transducer for building management system or PLC (Modbus)

SPECIAL ADVANTAGES

  • Compact design saves space and costs during installation
  • Seamless and permanent recording using a large measurement data memory or via online data acquisition (e.g. GridVis® service)
  • High data security and redundancy
  • Comprehensive communication options and protocols
  • Versatile, predefined reports for power quality and energy consumption analysis (via GridVis® service)
  • Simple report generation at the touch of a button or automatically according to defined schedules
  • The most accurate measurement results ensure an effective infrastructure and high production availability
  • Generic Modbus profiles: Any Modbus-capable third-party devices and systems can be integrated and visualized in the measurement concept (Modbus RTU)
  • Long-term availability of the measuring devices guarantees easy retrofitting for system expansions

ENERGY DATA ACQUISITION & LOAD PROFILES

  • Detailed recording of energy data and load profile
  • More transparency in the energy supply through energy analyses
  • Safe design of the power distribution equipment

COST CENTER ANALYSIS

  • Determination of energy costs
  • Breakdown and allocation of energy consumption

ENERGY MANAGEMENT SYSTEMS (ISO 50001)

  • Continuous increase in energy efficiency
  • Cost reduction
  • Multifunctional network analyzers from the UMG 96RM series are an important component of energy management systems
  • TÜV-certified GridVis® software in accordance with ISO 50001

TRANSPARENCY OF THE ENERGY SUPPLY

  • More transparency thanks to a multi-level, scalable measurement system
  • Detection of individual events through continuous measurements with high resolution

POWER QUALITY MONITORING

  • Indications of insufficient power quality
  • Initiation of measures to rectify network problems
  • Avoidance of production downtimes
  • Significantly longer service life of operating equipment
  • Improved sustainability

MEASURING DEVICE WITH ACCURACY OF 0.2 % (V), KWH CLASS 0.5

  • High sampling rate with 21.3 kHz
  • Reliable measuring accuracy of 0.2% (V)
  • Active energy class (kWh): 0,5

ENERGY METER WITH 7 TARIFFS, ACTIVE AND REACTIVE WORK

  • Energy measurement in 4 quadrants with 7 tariffs each for active and reactive energy
  • Reliable and precise recording of work values for individual consumers

COMMUNICATION OPTIONS: ETHERNET, PROFIBUS, MODBUS, M-BUS …

  • Numerous interfaces and protocols ensure an uncomplicated system connection (energy management system, PLC, SCADA, BMS)

LARGE MEASUREMENT DATA MEMORY

  • Storage of measurement data over a very long period possible
  • Recording freely configurable

HARMONIC ANALYZER

  • Harmonic analysis up to the 40th harmonic
  • Information on power quality, grid perturbations and possible “grid polluters”

PLUG-IN SCREW TERMINALS

  • Convenient installation even in tight spaces

BACKLIGHTING

  • Large, high-contrast LCD display with backlighting
  • Very good readability and intuitive operation even in low light conditions

4TH CURRENT TRANSFORMER INPUT

  • Continuous monitoring of the N conductor using the 4th current input
  • Available for the UMG 96RM-P and UMG 96RM-CBM variants

BASIC DEVICE

  • RS485 interface with Modbus protocol and 2 digital outputs enables fast and cost-effective monitoring of power quality and energy consumption